Should Cars Have High End Audio Cables

For years it has been well understood in home audio that cables can have a tremendous impact on a sound system, both good and bad. Choose the right cables and you can expect a system to come to life. Choose poorly designed cables, and you may forever be wondering why you can’t get your system to come to life.

Car audio however, has been a different story. While many companies still offer coaxial interconnect cables, most have come to realize that the basic twisted pair design offers far better noise rejection in a vehicle. And then… Nothing. That’s it. Innovation seems to have hit a brick wall at the shielded twisted pair interconnect in car audio. This begs the question; Should Cars Have High End Audio Cables?

To begin with, let’s briefly go back to home audio. After many years of fighting an uphill battle, the idea that cables make a difference has become a mainstream ideology amongst audiophiles. But it isn’t just audiophiles who can hear the difference. In fact, in our own testing, the differences can be heard by just about anybody, even on very modest audio systems. It just takes a willingness to discard any preconceived notions and actually listen to some music.

So, if cables make a difference in home audio, is there a reason why it shouldn’t matter in car audio? The quick answer is no. The following outlines some of the reasons why cables matter just as much, if not more, in car audio.

Many people are under the impression that car audio uses shorter cables than home audio, and therefore does not need to bother with high fidelity cables. This is completely incorrect. While the typical interconnect length in a home audio system is about 1 meter, vehicles will frequently use 5 or 6 meter interconnects to put amplifiers in the trunk. In terms of speaker cables, car audio almost always uses cables longer than the 6-8 feet used in most home audio setups.

Vehicles represent a far more challenging environment for cables than home audio systems. Two typical sources of noise in cables are Electro-Magnetic Interference (EMI) and Radio Frequency Interference (RFI). In vehicles, the entire chassis is frequently used as the ground return path. This allows noise from car components such as the alternator to be inducted into the audio cables via EMI. In terms of RFI, unless proper shielding is used, the longer cables in cars will act as antennas and pull in more noise. A third source of noise in a vehicle is vibration. This is of course far worse in a vehicle than in a home system. Pear Cable is the first company to bring out a car audio cable that virtually eliminates the noise caused by cable vibration. The TRIBODeadÔ technology present in the Comice Silver Interconnect is an electrically conductive plastic layer that prevents static electrical charges, caused by vibration, from building up in the cable.

- Is Quality Sound Just for Home Audio or does it have a Place in Car Audio Too?

Some people feel that a car audio sound system will never be as good as a home audio system, and therefore high fidelity cables are a waste of money in a car. This is a faulty conclusion. The experience of listening to music in your vehicle while driving down the highway is unique and cannot be replicated in the home audio environment. The bottom line here is that many people spend more time listening to their car audio system than their home system, and they want it to be the best that it can be. The characteristics of bad audio cables (listening fatigue, poor realism, overly bright treble, or general noise) will all still be audible in a car audio system. Just like home audio, the wrong cables in your vehicle will kill the listening experience.

At the end of the day, many people want quality sound in their vehicles. If you are installing an aftermarket system in your vehicle and you care about sound quality, you need to care about cables. If you are only interested in having the loudest car, without regards to accuracy, then high fidelity audio cables probably aren’t for you. Otherwise, it simply doesn’t make sense to shell out good money on amplifiers and speakers, only to hook it all up with mediocre wire. Car audio enthusiasts are every bit as serious as home audio enthusiasts, and now there is finally a cable company that is serious about serving their needs.

Article written by Adam Blake.

car entertainmentcar audiocar dvdplayer

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

Be the first to comment - What do you think?  Posted by admin - March 6, 2010 at 10:41 pm

Categories: Articles   Tags: , , , ,

Get a Wireless Home Theater System at the Best Price Possible

A wireless speaker home theater system allows you the freedom to place your speakers anywhere in a room without having to figure out how to hide the speaker wires.

There are two types of wireless speaker home theater systems – add-on systems and integrated systems.

Add-On Wireless Home Theater System

Read more…

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

Be the first to comment - What do you think?  Posted by admin - January 25, 2010 at 10:43 pm

Categories: Articles   Tags: , , , , , ,

Pyle Pro PT110 80Watt AC/DC Microphone PA Amplifier

  • 1/4-inch phone jack
  • LED level display
  • Master volume control
  • Tone control
  • Mix bus jacks

Product Description
The Pyle Pro PT110 is compact and versatile, in a mobile or fixed setup, using either AC power or 12-volt DC (as in a cigarette lighter socket in your automobile or boat). The three-channel mixer will accept two microphone inputs and one auxiliary or phono input. A mix bus is included, allowing you to daisy chain multiple amplifiers…. More >>

Pyle Pro PT110 80Watt AC/DC Microphone PA Amplifier

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

Be the first to comment - What do you think?  Posted by admin - January 24, 2010 at 9:23 am

Categories: Amplifiers, Pyle   Tags: , , , , ,

Marantz ST7001 XM Ready and AM/FM Stereo Tuner

  • XM Satellite Radio Ready (requires XM subscription and optional XM Mini-Tuner package)
  • 2 stereo analog audio outputs
  • AM/FM tuner with 100 station presets (10 groups of 10 stations each)
  • 100 XM channel presets (10 groups of 10 channels each)
  • customizable radio station and XM channel IDs

Product Description
The ST7001 continues the legendary Marantz tradition of tuner performance with a digitally-synthesized “front end” optimized for both high sensitivity and high selectivity. This makes the ST7001 a great choice for both urban and rural areas. The audio circuitry follows this same high-quality pattern with custom-selected parts in a meticulous layout to maximize signal quality while minimizing interference. In addition, the ST7001 boasts a wide variety of convenience … More >>

Marantz ST7001 XM Ready and AM/FM Stereo Tuner

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

2 comments - What do you think?  Posted by admin - January 23, 2010 at 9:25 am

Categories: Amplifiers   Tags: , , , , ,

Wilson Electronics 841245 SOHO Cell Phone Signal Booster Kit for Small Office and Home Office with Omni-Directional and Panel Antennas

  • Complete kit
  • Easy to install
  • Covers up to 2,500 free square feet
  • Covers 800/1900 MHz Frequency
  • Install Assistance Available through Tech Support

Product Description
The 50 dB SOHO Dual Band 800/1900 MHz In-Building Cellular Amplifier Kit is designed to provide enhanced indoor cellular coverage for up to 2,500 free square feet. The amplifier improves cellular signal (both voice and data) for all U.S. cellular providers (except iDEN/Nextel). Provides enhanced cellular signal for multiple cell phones and cellular data cards simultaneously. The amplifier kit includes: 50 dB SOHO 800/1900 MHz Cellular Amplifier, Outside Dual Band Om… More >>

Wilson Electronics 841245 SOHO Cell Phone Signal Booster Kit for Small Office and Home Office with Omni-Directional and Panel Antennas

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace

1 comment - What do you think?  Posted by admin - January 22, 2010 at 9:28 pm

Categories: Amplifiers   Tags: , , , , , , , , , , , , ,

Next Page »

Powered by Yahoo! Answers